397 Jobs Found

This well established and growing plastics manufacturer is currently seeking an experienced Injection Moulding Setter Technician to join their team working on a day shift Monday-Friday.

As injection Moulding Setter Technician, your duties will include -

• Setting up operating parameters and trial injection moulding tools from scratch
• Trouble shooting process and mould issues
• Supporting/Training other setters
• Assisting with Process improvements/optimisation

To be successful in the role of Setter Technician, the ideal Candidate will -

• Have significant experience with setting, conditioning and basic maintenance of machines and tools
• Be able to set machines up from scratch, including of trialling new tools
• Be experienced with process optimisation and continuous improvement
• Be a competent trouble-shooter
• Have experience of working with a range of materials

This is a hands-on role where you will contribute to the daily activity of setting tools but also have the technical ability to help resolve challenging jobs.

Please note, if your application is suitable, one of our consultants will call you within 5 working days. If you have not heard from us within this time, your application has unfortunately been unsuccessful, however we will keep your details on our talent management system to consider you for future opportunities.

Protection & Control Engineer

A Global Engineering business that service the Rail sector, is looking to expand their team with a Protection & Control Engineer. Well regarded within its markets, this business offers social working hours, on-site parking and an all-around friendly working environment for the right engineering professional.

For suitability, we would love you to have the below:

- Good knowledge on the Protection principles;

- Experience on producing Protection setting calculations;

- Understanding of HV Schematic design;

- Creation of Protection philosophy documents and design;

- Producing Communication Network architecture;

- Produce Protection &Control option selection reports;

- Experience with IEC61850 protocol - configuration/ de-bugging/ implementation/ testing;

- Hands on experience with different manufacturer (Siemens, Alstom, ABB etc.) products and systems;

- Experience in producing Testing & Commissioning strategies and fault analysis experience;

- Testing and commissioning experience, willingness to travel to site;

- Project engineering capabilities, handling Client meetings and provide suggestions and inputs to projects;

- Good communicational, highly motivated and good inter-personal skills;

- Understanding of 25kV AC traction system.

Activities and Deliverables required:

- Design statements (Form-B)

- Protection and Control Philosophy (Form-A)

- Protection Setting calculations for AC Traction system

- SCADA IO List (all Controls, Alarms, Indication, Analogues with IEC61850 identity);

- GOOSE Communication matrix;

- Network communication architecture;

- IP/VLAN strategy document;

- PSL, SET, DEX files for Protection relays;

- MCL, CID and SCD file for Control;

- Site T&C support (willingness to travel to site if required);

- Client meetings

In return benefits include -

• Attractive salary.
• Friendly working environment.
• Social able working hours.
• Easily accessible commute routes and on-site parking.
• Pension and annual leave package.
• Working for a Global and ever-growing Engineering business.

If you are interested and would like to know more please apply through this advert immediately! Location is based in Yorkshire.

Please note, if your application is suitable, one of our consultants will call you within 5 working days. If you have not heard from us within this time, your application has unfortunately been unsuccessful, however we will keep your details on our talent management system to consider you for future opportunities.

This well-established manufacturer of plastic products is currently seeking an experienced Injection Moulding Setter Technician to join their team on a 3 shift basis, Monday to Friday.

Working at their modern facility, with the mouldshop machinery ranging from 22-500T, as setter Technician your duties will include -

• Condition setting
• Tool changing
• Troubleshooting
• Working with robots

To be successful in the role for injection Mould Setter Technician, the ideal candidate -

• Must have experience within injection moulding
• Will be able to set machines, ideally from scratch
• Be able to troubleshoot moulding issues

On offer -

• Starting salary of £25-28k depending on salary
• Overtime
• Working within a modern facility

Apply now to be considered for this role!

Please note, if your application is suitable, one of our consultants will call you within 5 working days. If you have not heard from us within this time, your application has unfortunately been unsuccessful, however we will keep your details on our talent management system to consider you for future opportunities.

Interested in working for an independent as opposed to a large corporate agency? Specialist rather than generalist? Looking for a more supportive working environment? If you're answering yes to these questions then please read on!

ASC Connections is an established Consultancy with REC Audited status and an enviable reputation for excellence, developed over our 28 year history. We operate within niche market specialisms across both Technical and Business disciplines delivering a professional, dedicated and consistent service to clients and candidates alike. With 5 offices across the UK, we are always looking to expand our brand and provide excellent opportunities for development.

As an Engineering Recruitment Consultant you will be responsible for:

• Working across a variety of roles, predominantly mechanical, quality & maintenance vacancies within Manufacturing and Production environments.
• Fulfilling a 360 degree consultative role.
• Sourcing candidates at all levels of seniority and matching effectively.
• Taking the candidate through the entire recruitment process, ensuring regular contact is maintained and a good relationship is developed.
• Meeting the client to understand their needs and developing long term relationships.
• Generating leads and following up on these.

We would love to speak to you if you:

• Are an experienced 360 Recruitment Consultant with previous experience in the engineering sector.
• Have the ability to bring in new business.
• Are experienced in developing / growing accounts
• Are a tenacious individual who isn't afraid to negotiate!

As an Engineering Recruitment Consultant you will receive an excellent package which includes a salary of £23,000 - £28,000 per annum plus an uncapped commission package. Holiday is 25 days plus one extra day each year (after 3 years' service) up to a maximum of 30 days. We also have a bit of fun with quarterly competitions and prizes which means that monthly incentives are always on offer!

The Engineering Recruitment Consultant vacancy is based in our office just north of Bristol in Aztec West which offers free parking. This is easily commutable from areas including Newport, Caldicot, Chepstow, Almondsbury, Yate, Stroud, Thornbury, Dursley, Chipping Sodbury, Portishead, Avonmouth and Lydney.

If you're interested in working with a friendly bunch of people and would like to have more autonomy in your role then please do not hesitate to apply!

Please note, if your application is suitable, one of our consultants will call you within 5 working days. If you have not heard from us within this time, your application has unfortunately been unsuccessful, however we will keep your details on our talent management system to consider you for future opportunities.

Are you a skilled CNC Programmer looking to work for a global business with a more corporate feel? Want to work in a modern facility with state of the art equipment, plenty of overtime and an environment that encourages training and development? Then we want to hear from you!


The business is a specialist design, manufacturer, and supplier of food processing, confectionery and fast moving consumer goods equipment, distributing all over the UK and overseas. With sites in the UK, USA, and Europe, they're global reach means they can manufacture on any scale worldwide. The products are produced under a "World Class" quality system accredited to ISO9001, ensuring the highest possible standards are maintained. With stability and an established name in the industry, they are a recognised equal opportunities employer.

Benefits include a basic hourly rate of £13.85 p/h, overtime paid at Time & 1/2 for weekday and Saturday,
30 days holiday including bank holidays, full sick pay during absence, a company pension scheme with up to 6% employer contributions, option to join a private healthcare scheme, and life assurance 3x salary.

Responsibilities for the role include -

- Programming, Setting and Operating of HAAS CNC Machining centres
- Writing new programmes long hand at the machine, then prove out
- Full setup including tooling, jigs, fixtures, machine speeds, and feeds
- Running a first off and inspecting using measuring equipment, before final pass off from QC department
- Working from customer drawings, CAD designs, and job route cards
- Producing one-off components to small batch work from a range of materials
- Continuous improvement to programmes written to improve cycle time, tooling life and scrap reduction


We would love to hear from you if you've had experience in the following -

- previously worked as a CNC Milling Programmer, CNC Miller, or Machining Centre machinist
- Be able to write using FANUC or Haas controls
- Confident with high-frequency setups for 1 off component manufacture
- Understand and interpret 2D & 3D drawings
- Flexibility towards overtime when required

Working hours are 7:30am - 4pm Mon to Thurs, with a 12:30pm on finish on Friday

Please note, if your application is suitable, one of our consultants will call you within 5 working days. If you have not heard from us within this time, your application has unfortunately been unsuccessful, however we will keep your details on our talent management system to consider you for future opportunities.

Are you a skilled fabricator looking to improve your working environment? Want to work in a modern facility with state of the art equipment, plenty of overtime and an business that encourages training and development? Then we want to hear from you!


The business is a specialist design, manufacturer, and supplier of conveyor and automated solutions all over the UK. With an expert team of staff on board including workshop foreman and manager to support your initial integration into the team, you'll be an integral part of already is a hugely successful operation with a multi million pound turnover each year.

Benefits include a basic hourly rate of £14.35 p/h, overtime paid at Time & 1/2 for weekday and Saturday,
25 days holiday plus bank holidays, a company pension scheme, childcare vouchers and other quarterly incentives.

Responsibilities for the role include -

- Assembly of pre cut mild and stainless steel section / sheet from 1mm to 20mm thick steel
- Cutting, folding, bending and shaping into required sizes
- MIG & TIG welding of materials, jigging of parts into place
- Dressing, linishing and finishing of welds ready for inspection
- Working from detailed engineering drawings and 3d diagrams, as well as material lists
- Ensuring all work areas are maintained to strict health & safety standards

We would love to hear from you if you've had experience in the following -

- previously worked as a Sheet Metal Fabricator, Welder Fabricator, Welder Fitter, TIG Welder
- Strong TIG & MIG skills
- Understand and interpret 2D & 3D drawings
- Flexibility towards overtime when required

Working hours are 7:30am - 4:30pm Monday to Thursday, with a 12:30pm finish on Friday

Please note, if your application is suitable, one of our consultants will call you within 5 working days. If you have not heard from us within this time, your application has unfortunately been unsuccessful, however we will keep your details on our talent management system to consider you for future opportunities.

Tool Room Manager (Permanent Position - Competitive package on offer)

An established growing manufacturer, is looking to recruit an experienced Tool Room Manager to oversee and manage a small team.

To be successful you will be driven and have the aptitude to use your own initiative to problem solve in a timely & effective manner.

This is an excellent opportunity to join a small but busy engineering business, which can provide further training & development and career progression.

Benefits:

• 25 days stats
• Pension
• Life Assurance
• Social Events
• Uniform
• Free Parking

Purpose of Role:

As Tool Room Manager your key role will be to design, manufacture and maintain tooling to support the production of cold pressed components.

Skills / Experience:

Responsibilities:

For more information, please email your CV to: stuart.williams@asc-connections.com

Please note, if your application is suitable, one of our consultants will call you within 5 working days. If you have not heard from us within this time, your application has unfortunately been unsuccessful, however we will keep your details on our talent management system to consider you for future opportunities.

Are you an Electrical Engineer keen to break into the Aerospace Industry? Want to work in an ultra-modern manufacturing facility with state of the art equipment, plenty of overtime and an environment that encourages training and development? Then we want to hear from you!


The business is a global manufacturer, and supplier of a wide range of high-quality products for the aerospace and defence sectors, with sites across the world they are part of the biggest Aerospace manufacturing group in the world. With a site stretching over 200,000 sq feet, they have superb manufacturing facilities ensuring the highest possible standards are achieved. Part of the Midlands Aerospace Alliance, this company retains the reputation of a market leader in this industry by attention to detail and business excellence.

Benefits include a salary of circa £46K, overtime availability, 25 days holiday plus bank holidays, a company pension scheme with up to 6.5% employer contributions, and various other benefits

Responsibilities for the role include -

- To provide electrical maintenance to a range of CNC, manual and automated machinery, and any other ancillary plant
- Reactive breakdown maintenance, reducing machine downtimes to a minimum
- Electrical repairs to motors, control panels, wiring, relays, contactors, switches and bulbs
- PLC Fault finding and interrogation
- Ensure adequate spares to support the plans
- To comply with legal requirements and to work within Company health and safety guidelines
- Supporting the maintenance manager with facilitating the in house CMMS

We would love to hear from you if you've had experience in the following -

- Multi skilled engineer, shift maintenance engineer, electrical engineer, machine technician
- Be able to fault find and interrogate PLC's
- Understand and interpret Electrical drawings and schematics
- Strong background in CNC machine maintenance and servicing

Working hours are 37hrs per week rotating Morning, Afternoon & Nights Shifts Mon to Fri (Every Friday is a 5hr shift finish)

Please note, if your application is suitable, one of our consultants will call you within 5 working days. If you have not heard from us within this time, your application has unfortunately been unsuccessful, however we will keep your details on our talent management system to consider you for future opportunities.

Are you a Team Leader looking to break into the Aerospace Industry? Want to work in a modern manufacturing facility with state of the art equipment, plenty of overtime and an environment that encourages training and development? Then we want to hear from you!


The business is a specialist design, manufacturer, and supplier of a wide range of high-quality products for the aerospace and defense sectors, distributing all over the UK and overseas. Key clients include Tier 1 to Rolls Royce UK. The products are produced under a "World Class" quality system accredited to ISO9001, ensuring the highest possible standards are maintained. Part of the Midlands Aerospace Alliance, this company retains the reputation of a market leader in this industry by attention to detail and business excellence.

Benefits include a basic hourly rate of £17 - £19 p/h, overtime paid at Time & 1/2 for weekday and Saturday,
20 days holiday plus bank holidays, and extra days holiday for 0% sickness, a company pension scheme with up to 6.5% employer contributions, and an annual bonus (dependant on company performance and profitability)

Responsibilities for the role include -

- Organizing the team daily to carry out all works orders to ensure targets are met
- Supervising the team to ensure completion of jobs to customer required deadlines
- Ensure that all quality standards are met during and after each job is completed
- To ensure that all health and safety, PPE and best practice is being adhered to
- Troubleshooting any production issues, resolving before they escalate
- Carry out fabrication of various materials including mild, carbon, duplex, super duplex and stainless steel
- Marking out, cutting, folding, bending and shaping into required sizes
- MIG & TIG welding of materials, jigging of parts into place ready for positional welding
- Working from detailed engineering drawings and 3d diagrams, as well as material lists


We would love to hear from you if you've had experience in the following -

- previously worked as a Fabrication Supervisor, Team Leader, Workshop Foreman, Charge Hand or manager
- Be able to fabricate and weld all types of large scale structural projects
- Apprentice trained in welding and fabrication
- Understand and interpret 2D & 3D drawings
- Flexibility towards overtime when required

Working hours are 8am - 4:30pm Mon to Thurs, with a 4pm finish on Friday

Please note, if your application is suitable, one of our consultants will call you within 5 working days. If you have not heard from us within this time, your application has unfortunately been unsuccessful, however we will keep your details on our talent management system to consider you for future opportunities.

Design Engineer

Location: Cambridgeshire

Salary: £40,000 - £50,000

Are you an established designer within the Automation sector? Are you looking to make a move in to a role which works from CAD drawing to PLC Programming? Have you got experience in working on bespoke projects?

A Design/Automation engineer position is live in Cambridgeshire, following company growth. Predominantly this is a machine designing role, however this role could also include many aspects of delivering bespoke automation solutions. You can expect your day to consist of researching, designing, specifying and CAD drawing of bespoke systems and will include both on-site and client based work.

Job Duties

• To be in charge of Mechanical Design Work packages for a project
• Adhere to agreed deadline dates for the mechanical design of systems and associated equipment.
• Work to company values with an importance to safety procedures.

Responsibilities

• Produce CAD drawings and designs of bespoke machinery and parts
• Research and development work across automation processes
• Commissionin bespoke machinery
• PLC and robot programming for automation projects
• Occasionally provide support on mechanical assembly and installation work (this is not the prime job role but you will need to be prepared to support where necessary).

Requirements

• Solidworks, Inventor, AutoCad3D or Similar
• Robot Programming - Beneficial
• PLC programming in structured text - ideally Beckhoff - Beneficial

Other ideal criteria

• Mechanical and Electrical engineering ability
• CAD design for automated machinery
• Solidworks experience
• Commissioning a wide variety of machinery
• Mechanical engineering qualification
• Experience with programming PLC's for automated produts
• KUKA robot programming training and experience

If you would like to know more about the associated benefits with the position. Please apply.

Please note, if your application is suitable, one of our consultants will call you within 5 working days. If you have not heard from us within this time, your application has unfortunately been unsuccessful, however we will keep your details on our talent management system to consider you for future opportunities.